Product Options
SpectraPLUS version 5.0 consists of a base analyzer plus a set of 10 additional options so you can purchase only the features you need. Additional options can be purchased at anytime and activated with a simple phone call. The downloaded software includes all options for the 30 day evaluation period.
|
SpectraPLUS |
Base Analyzer |
Features include Single Channel Operation, Real Time Mode, Spectrum, Time Series, and Phase displays, Narrowband FFT sizes through 32,768 points, 1/1, and 1/3 Octave Analysis, Triggering, Markers, Overlays, Averaging, Peak Hold, Decimation, Mic Compensation, A, B, C Spectral Weighting.. |
|
Option /01 |
Dual Channel Processing |
Dual Channel Operations - Real and Complex Transfer Functions, Coherence, Average, Cross Spectrum and cross channel delay compensation. |
|
Option /02 |
Recording and Post-Processing Modes |
Recorder and Post Processing modes - allows direct hard disk recording and playback. Post Processing mode provides comprehensive analysis from WAV files. Includes Digital Filtering capability |
|
Option /03 |
Signal Generator Utility |
Advanced Signal Generation - Pink/White noise, Noise Burst, Swept Sine, 1 kHz tone, Multiple Tones, Saw, Square, Pulse, IMD test tones and User Defined WAV source. Can generate different signals in each channel. |
|
Option /04 |
Color Spectrogram Display |
Spectrogram View - displays the spectrum versus time in greyscale or color format for advanced joint time-frequency analysis. |
|
Option /05 |
3-D Surface Display |
3-D Surface View - displays the spectrum versus time in a 3-Dimensional perspective format |
|
Option /06 |
Distortion Analysis Utilities |
Distortion Analysis - measurement utilities for THD, THD+N, IMD, SNR, NF, SINAD. Each measurement is displayed in real time in a separate resizeable window. Also includes a dedicated THD+N versus Frequency utility that quickly and conveniently measures the distortion characteristics of your device over a range of frequencies. |
|
Option /07 |
High Resolution Analysis |
Adds 24 bit sampling precision and sampling rates above 48kHz (sound card dependent). Adds FFT sizes up to 1,048,576 points, and Octave scaling to 1/96. |
|
Option /08 |
Advanced Scaling and Calibration |
Adds independent channel calibration and scaling for left and right channels with separate views for each. Useful for applications requiring separate channel scaling and calibration such as simultaneous sound and vibration measurements. This option also includes calibration conversions from Acceleration to Velocity or Displacement; also adds Power Specral Density scaling option for accurate noise measurements. |
|
Option /09 |
Acoustic Toolset |
Reverberation Time (RT60) utility features bar graph of reverberation time versus frequency band, 3-D Surface plot of the decay versus frequency and individual decay plots versus time. Delay Finder measures delay between two channels in milliseconds, feet or meters. Speed of sound - converts the delay value between milliseconds, feet or meters. Equivalent Noise (Leq) utility provides comprehensize noise level calculations for LeqT, Leq, Lpk , Lsel, Lmax, Lmin, L10, L50, L90. Stereo Phase Scope for real-time monitoring and analysis of signal phase. Phase scope mode displays a standard oscilloscope X-Y orientation (lissajous pattern) for analysis of phase, polarity, missing channel detection and stereo separation monitoring. |
|
Option /10 |
Automation Toolset: |
Macro Command Processor utility allows you to easily automate measurements, record SPL and spectral data at user specified intervals/duration with time/date stamp, save files with user-defined names using a script-based programming language. It uses the underlying DDE syntax for an automation solution without requiring a third party program. Dynamic Data Exchange (DDE) allows the capability for an external program to control and read results from the analyzer in real time. Works with any program that supports DDE such as C++, VB, Excel, Access and others. Data Logging utility produces an output text file containing selected spectral parameters + time-stamp for dynamic signal tracking and unattended event monitoring. |